AMCC 3WARE 9650SE Installation Guide download pdf (Page 37)

Installation Instructions

www.3ware.com 33

3 Press down gently until the BBU is seated.

Figure 26. BBU control module connected to the controller

4 Turn the controller over, insert the plastic screw head that you

removed in step 1 into the plastic post, and tighten it gently but

firmly. (Do not over-tighten!)

Warning! To avoid possible damage to the controller and

the motherboard, make sure the module is connected in the

proper orientation, and that the plastic post is attached.

When the plastic post and the connector are attached

correctly, the module is in the correct orientation.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45

No comments

AMCC 3WARE 9650SE Installation Guide Page 37