AMCC 3WARE 9650SE Installation Guide download pdf (Page 34)

Chapter 3. Installing the Battery Backup Unit

30 3ware 9650SE Serial ATA RAID Controller Installation Guide

Tools and equipment required

 Slot-head screwdriver

 Grounding strap

 Battery Backup Unit (BBU) and battery

 3ware 9650SE series controller

Installation Overview

The Battery Backup Unit (BBU) is comprised of two pieces: the

battery module and the BBU control module.

These pieces attach to the controller at the points illustrated in

Figures

21 through 23:

a Clips on the battery module match to slots on the half-height

controllers (4-port and 8-port) and holes on the full-height

controllers (12-port, 16-port, and 24-port).

b Connector on the BBU mates to receptacle on the controller.

c Post on the BBU mates to post hole on the controller.

Figure 21. Points of connection on the BBU <>

Note: The battery will drain if it is plugged into the BBU and

there is no power to the unit. Wait to plug the battery into the

BBU until the system is ready for use.

a) Clips

b) BBU connector

c) Post

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 44 45

No comments

AMCC 3WARE 9650SE Installation Guide Page 34